WORLDWIDE SHIPPING
Share

Sharpening stone grain 3000-8000 - Wusthof

€79.00 €64.75
Availability: In stock
WÜSTHOF Ceramic Whetstone.
Whetstones from WÜSTHOF offer outstanding sharpening performance.
Due to the very good bond and open-pore structure of the whetstones, new particles are constantly exposed during sharpening.
This combined whetstone has two different sides.
A coarse side for presharpening and a fine side for final honing.
Super fine grain (J3000 / 8000).
For edge maintenance (J3000 grit) and removing the fine burr and honing the edge. (J8000 grit).
Colour: blue / white.
Length 20 cm, wide 6 cm, height 3 cm.
Suitable for use with water
FAQs
Why is it important to sharpen knives?
A sharp knife is safer and more efficient: it requires less force and delivers precise cuts. A dull blade can slip and increase the risk of accidents.
How often should I sharpen my knives?
It depends on how often you use them and the type of blade. Generally, regular honing with a honing steel is recommended, along with deeper sharpening every few months or when the knife loses effectiveness.
Should I use a honing steel or a sharpener?
A honing steel maintains the edge and prolongs the life of the knife, but it doesn’t actually sharpen. To restore the edge, you need a sharpener (manual, electric, or whetstone). The ideal routine is to use both: the honing steel for daily care, the sharpener for periodic maintenance.
What’s the difference between a smooth, grooved, or ceramic honing steel?
A smooth steel realigns the edge without removing metal. A grooved one has a slightly abrasive action, taking off a small amount of material. A ceramic steel is gentler and suitable even for hard blades like Japanese knives.
How do you correctly use a honing steel?
Hold the steel vertically and draw the blade across both sides at a 15–20° angle using light, steady strokes. Just a few passes are enough to maintain the edge.
Can I sharpen any type of knife?
Almost all types, but be careful with serrated or ceramic blades: they require specific tools or techniques. Always check the manufacturer's guidelines or ask us for advice.
What are sharpening stones for?
A stone removes steel from the edge and rebuilds it. It gives more control than any other method: your hand sets the angle, not a fixed slot, so it works on Western and Japanese knives and on different thicknesses and profiles. It takes some practice, but it also wastes the least steel, because you only work where the edge needs it.
Which grit should I choose?
Grit measures how fine the abrasive is: the higher the number, the finer the stone. Below #400, stones are used to repair small chips or a badly damaged edge; between #800 and #1500 is where the actual sharpening happens; from #3000 upwards, stones refine and polish the edge. For a first stone, a 1000/3000 or 1000/6000 combination stone is the most versatile starting point.
Water stones, oil stones or diamond stones: what's the difference?
Water stones are the most common choice for kitchen knives: they cut quickly and work with a film of water that carries away the residue. Some need soaking before use, others only need wetting on the surface; each stone's product page says which. Oil stones cut more slowly and need the lubricant specified by the manufacturer. Diamond stones remove steel very quickly, stay flat for a long time and also suit very hard steels.
What angle should I hold on the stone?
The knife's original one. As a rough guide, many Western knives are sharpened at 15 to 20° per side and many Japanese knives at 10 to 15°, but the exact figure depends on the model and should be checked against the manufacturer's specifications. Holding the angle steady through every stroke matters more than hitting an exact number: a wobbling angle rounds the edge. A clip-on guide on the spine helps in the first sessions.
How do I know the sharpening has worked?
As you work one side, a thin burr forms on the opposite side. You can feel it by gently drawing a fingertip across the edge, from the spine outwards, never along it. Once the burr runs the full length of the blade, switch sides, then move to finer grits to reduce it. A well-finished edge slices a sheet of paper cleanly, without tearing it.
How do I look after a sharpening stone?
Rinse it after use and let it air-dry away from direct heat; don't put it back in its box while damp. Over time the surface wears hollow in the middle, and on a stone that is no longer flat you can't hold a steady angle: a flattening stone brings it back to flat. It also helps to keep stones of different grits apart, because coarse grit residue scratches the work of a fine stone.
Chat with us